The RIFE Solid State Relay is built for motorsport, with a billet housing, a sealed 4 pin Deutsch DT style connector and an onboard fuse. With no moving parts, it switches in around 10 microseconds and handles PWM control, making it a strong choice for transbrakes, solenoids and other switched loads. LED indicators show input and output status for quick setup and diagnosis.
Features
- Solid state board, potted and vibration resistant
- Switches in around 10 microseconds
- PWM compatible, 0 to 100% duty cycle
- Up to 1000 Hz above 10% duty cycle
- Onboard fuse
- LED input and output indicators
- 4 pin Deutsch DT style connector
- Billet housing, machined and assembled by RIFE
What’s Included
- 1 x RIFE solid state relay (52-1505)
- Not included: mating connector (4 pin DT plug), sold separately
Specifications
- Part number: 52-1505
- Operating voltage: 7 to 20V DC
- Maximum continuous current: 15 A
- Switching time: approx. 10 microseconds
- PWM frequency: up to 1000 Hz (above 10% duty cycle)
- Connector: 4 pin Deutsch DT style
Good to Know
- Typical uses: transbrake control, solenoid drivers, switched power, lighting, triggers and cooling fans (check the fan current draw first).
- Tested by RIFE at 30 A, but the DT pins are rated at 15 A, so 15 A continuous is the limit.
- For racing use only. Not for road use.
Reviews
There are no reviews yet.